Jun 5, 2015 - Motioninjoy DS3 Tool is a Playstation controller adapter driver for. PlayStation Sixaxis or DualShock 3 controllers to your Windows PC.
SCP Driver Package is an open-source driver which allows for DS2 (DualShock 2), DS3, and DS4 to work natively on Microsoft Windows. Windows will recognize the DualShock controllers as Xbox 360 controllers.
Download[edit]
ScpServer Reloaded (For Windows 10 users)
Features[edit]
Native XInput support through USB + Bluetooth.
The Filter Driver + Wrapper is included with the package but isn't supported.
Instructions[edit]
Pre-Install1. Uninstall MalwareohJoy (if already installed)
2. Update your 360 controller drivers if you haven't done so.
From the thread itself:
New Install
- Connect your Dongle and DualShock controller via USB and let Windows install its default drivers.
- Copy the archive to a temporary directory.
- Right-click on the archive and select Properties.
- Click the Unblock button if it is displayed on the General tab.
- Unpack the archive.
- Create a directory where you want the Service to run from.
- Copy the contents of the ScpServerbin to the directory you created.
- Run ScpDriver.exe.
- XP/Vista - check the Force Install option. Win 7/8 leave it unchecked.
- Click Install.
- If you do not see the install summary as per screenshot and your dongle is in the directly supported list - click Uninstall, check the Force Install option, click Install.
- Click Exit.
You may need to run ScpMonitor.exe as well if you're using Bluetooth.
PCSX2 and PCSX-Reloaded[edit]
Double check your Game Device APIs boxes.
- Copy the LilyPad-Scp-r5350.dll from the /bin/Win32/ folder and paste it into the plugins folder.
- Change the pad plugin in PCSX2 or PCSX-Reloaded from the default LilyPad to the LilyPad-SCP version.
- You may also need to disable DirectInput and XInput before the next step. To prevent crashing, which seems to vary from system to system.
- Then copy over XInput1_3.dll from /bin/Win32/ to PCSX2 or PCSX-Reloaded's directory. NOT the plugins directory.
- Now disable all other Game Device APIs other than native if you haven't already. Background input is fine though.
- Set keyboard input to raw while you're at it. For PCSX-R's hotkeys, since Windows messaging input kills them.
- You'll still need to bind the controls. Switch over to the Pad 1 tab to do so.
- If done properly this will also enable you to use pressure sensitive buttons without any further configuration
Notes[edit]
- Installing the Bluetooth SCP driver, which lets you connect your DS3/DS4 devices to your computer wirelessly via a Bluetooth adapter, requires the adapter to be solely dedicated to the SCP service. You will not be able to use other Bluetooth devices with it until you uninstall the Bluetooth SCP driver from the adapter.
- To put a DS3/DS4 to sleep, hold L1 + R1 + Home. Putting a controller to sleep will not actually fully turn it off. Its controller (player) number will remain locked at what it was, and any other controllers added to the setup will need to work around it. This is especially a pain when changing between different controller types (from a DS3 to a 360 pad, for example). The only way to fully disconnect it is to restart the SCP service, done either by manually restarting it or by restarting your computer.
- If you need DirectInput support for your DualShock controllers while using the SCP driver, you can try this wrapper.
![Ds3 Windows 10 Download Ds3 Windows 10 Download](https://images.filehippo.net/img/ex/4734__Motioninjoy%20DS3%20Tool.png)
Troubleshooting[edit]
You may have to go into properties and hit unblock
If you are having trouble installing it, please go over these to double check.
- Ensure the Xbox 360 driver installed correctly. Go into Devices & Printers > Xbox 360 Controller > Hardware and update the driver from there.
- Have you tried uninstalling and force installing it?
- Go into properties of all the .exe files and hit unblock, especially ScpService.exe.
- Did you install it as an administrator?
- Did the entire folder have Full control privileges for SYSTEM and Administrators?
- Do you have the relevant XInput1_3.dll in the relevant program's .exe's directory?
- Does SCPUser.exe show them working?
- Is the 'SCP DS3 Service' service running?
- In the case you're running wired, have you tried reinstalling SCP with Bluetooth unchecked?
Video guide[edit]
Retrieved from 'http://emulation.gametechwiki.com/index.php?title=SCP_Driver_Package&oldid=26619'
MotioninJoy DS3 is a driver, designed and intended to use all the features of the Sixaxis and Dualshock 3 controllers on a PC running Windows operating system including Windows XP, Vista, 7, 8, 8.1 or 10. You need to download the correct version that compatible with your computer, 32 bit (x86) and 64 bit (x64) systems. If you have a PlayStation now you can easily use the controllers on your Windows PC with the free MotioninJoy DS3 tool.
You can easily connect a PS3 controller through USB stick or Bluetooth adapter. Before, you should download and install the MotioninJoy DS3 software first you need to check whether your game supports joysticks, use the game’s control setting to set up your controller with the game. Some games require Xbox 360 controllers, namely popular first person shooter games, as that is all they are programmed to recognize. If you have one of these games try out the Xbox 360 controller emulator profile in the DS3 tool.
Some games do not support joysticks, but yet you can use the PS3 controller with those games with a custom profile in MotioninJoy’s DS3 Tool, you can map keyboards keys or even the mouse to the buttons and axises on your PS3 controller. First, you need to download the MotioninJoy DS3 drivers. To download the MotioninJoy driver, click the the download link given below and install on any Windows 7, 8, 8.1, 10, Vista and XP (32-bit or 64-bit).
The PS3 controller is programmed to attempt to establish a Bluetooth connection to its paired master when the USB cable is disconnected, and the PS3 is programmed to turn on whenever a controller paired with itself attempts to make a connection or the PS button is pressed. When you use the PS3 controller through USB on the computer and you haven’t paired the controller with your computer’s Bluetooth adapter, this will cause the PS3 to turn on after you disconnect the USB cord going to the PS3 controller from the PC.
How to Use PS3 Controller – USB Mode:
1. Connect your PS3 controller using the USB cable to a USB port where you would want to plug the controller in every time you want to use it.
2. Windows will then install its own drivers.
3. Plug in the Bluetooth adapter you want to use with MotioninJoy’s.
4. Unplug all other Bluetooth adapters till the installation complete.
5. The DS3 Tool automatically run and open the Driver Manager screen.
6. Press the load driver button, after a few seconds the log below the Load button will show the results of the driver install.
7. Click on Profiles in the DS3 Tool and enable the PlayStation 3 option to enable the controller sticks and SixAxis functions.
8. Next click on the “Game Controller Panel” button, then click Properties in the dialog box that comes up to see your PS3 controller working.
2. Windows will then install its own drivers.
3. Plug in the Bluetooth adapter you want to use with MotioninJoy’s.
4. Unplug all other Bluetooth adapters till the installation complete.
5. The DS3 Tool automatically run and open the Driver Manager screen.
6. Press the load driver button, after a few seconds the log below the Load button will show the results of the driver install.
7. Click on Profiles in the DS3 Tool and enable the PlayStation 3 option to enable the controller sticks and SixAxis functions.
8. Next click on the “Game Controller Panel” button, then click Properties in the dialog box that comes up to see your PS3 controller working.
How to Use PS3 Controller – Bluetooth Mode:
You don’t need to complete the Bluetooth instructions if you just want to use USB or don’t have any Bluetooth adapter, but if you do have a Bluetooth adapter and want to use it with MotioninJoy DS3 joystick driver, please continue. The MotioninJoy drivers will override your normal Bluetooth adapter’s drivers, so only the PS3 controller can connect to it.
1. Connect your PS3 controller using USB if it isn’t already connected.
2. Open the DS3 Tool and click the pairing tab or the Bluetooth Pair button, then click the Pair Now button.
3. Once your controller is successfully paired with your Bluetooth adapter.
4. Unplug the USB cord.
5. Whenever you want to connect your controller, just press the PS button.
6. To disconnect the controller hold the PS button until the light go out.
2. Open the DS3 Tool and click the pairing tab or the Bluetooth Pair button, then click the Pair Now button.
3. Once your controller is successfully paired with your Bluetooth adapter.
4. Unplug the USB cord.
5. Whenever you want to connect your controller, just press the PS button.
6. To disconnect the controller hold the PS button until the light go out.
Notes: You need complete the USB part first before using Bluetooth.
MotioninJoy Full Features:
• Operate via USB device or through Bluetooth adapter.
• Supports maximum four controllers at the same time with one BT adapter.
• Enable SixAxis support.
• Supports Windows 7, 8, 8.1, 10, Vista and XP (32-bit or 64-bit)
• DS3 rumble support.
• Supports Xbox 360 controller
• Full keyboard mapping and mouse emulation
• Supports maximum four controllers at the same time with one BT adapter.
• Enable SixAxis support.
• Supports Windows 7, 8, 8.1, 10, Vista and XP (32-bit or 64-bit)
• DS3 rumble support.
• Supports Xbox 360 controller
• Full keyboard mapping and mouse emulation
File Name: Motioninjoy
Download Size: 3.92 MB
File Type: .Exe
OS: Windows XP, Windows Vista, Windows 7, Windows 8 & 8.1 and Windows 10
License: Free Download
Language: Multi-language
Publisher: Motioninjoy
Version: 0-7-1001 (Latest Version)
Category: Free Joystick Driver